fire extinguishing system, flame detectors, fire detectors
This UV/IR flame detector is constructed by combining Ultraviolet Sensor that has spectral response range from 185nm to 260nm and Infrared Sensor that senses Infrared ray wavelength of 4.3§­

Our Products

UV/IR Flame Detector



This UV/IR flame detector constructed with high sensitive sensors and sophisticated software programmed to detect immediately and accurately the UV/IR wavelengths of heat and flames caused by fire. This detector is addressable and can be networked to send out visual signals, sound alarm signals, and to activate automatic extinguishing systems through output terminal of the detector or through control circuit when the detector senses UV/IR wavelengths of fire or flame.


Petrochemical Plants, Vehicle Coating/Painting Factories, LNG/LPG Storages, Tankers/Oilers, Semi-conductor Facilities, Power Plants (Atomic, Hydraulic/Thermoelectric, Cogeneration), Substation/Transmission Facilities, Parking Towers, Broadcasting Communication Facilities, Iron-Works Facilities, Research Laboratories, and Other facilities/equipments/areas that has fire breaking-out possibilities.

minimizing fault detection (sunlight and other non-fire sources)
- Real time monitoring of product status by RS-485 data communication
- Event data can be recorded and accumulated
The product assures high reliability by acquiring various quality certification and is an eco-friendly product by reducing the effects of EMI and EMC.
by dual sensing circuit of UV and IR
by adopting high sensitive sensors
RS-485 data communication, relay contact output
providing convenience for installation work
MODEL NAME CS-UIEX-11
Dimension 75(mm) X 58(mm)
Weight Appx. 0.5 Kg
sensing range 30M
Enclosure material Aluminum Diecasting
Operating Temperature range -40¡É ~ + 80¡É
Humidity range RH 0% to 85%
Field of View 100¡Æ (vertically and horizontally 50¡Æ)
Operating voltage DC 24 V ¡¾ 20 %
Power consumption Max. 40mA in standby, Max. 85mA in alarm
LED Indication Alternate blinking of Red, Green, and Blue LEDs for about 9 seconds when power is on initially. Green LED is continuously ON during normal standby state. Red LED is continuously ON in ALARM state.
Relay Outputs 1A at 30V DC, 0.5A at 125V AC
Explosion proof Ex d IIC T6
Water and Dust IP66
Csa bestouch | Heat detector | Fire detectors | Thermo controller | Flame detectors | Automatic fire extinguisher | Fire extinguishing system | Linear heat detector | Ccfl
Strobe lamp | Uv flame detectors | Fire extinguishing system | Disaster prevention system | Sitemap | Korean | Japanese | Chinese