|
Our Products
Digital Thermo-Controller
|
 |
 |
Digital
Thermo Controller
As the BESTOUCH Thermo-Controller is such a new-concept temperature
detector developed by domestic technology, it has very extensive
application fields such as temperature watches of ¡®equipment and
dry-way/process on production line¡¯, ¡®communication line/wire¡¯,
¡®electric power lines inside the utility-pipe conduit¡¯, ¡®electric
power facilities of substation and powerhouse¡¯, and ¡®mid/large size
buildings and factories¡¯. As this equipment is such a temperature
detector that converts the actual temperature values to digital
data and then transmits them to the communication repeater and the
main computer through serial communication (RS-485), it has better
accuracy and expandability then those detectors of analog method,
and also, real-time data communication is possible so that synthetic
facilities management efficiency can be maximized. |
 |
 |
| €ý Digitally handling every function
such as temperature sensing, analysis, dealing, transmission, and
so on. |
| Since the BESTOUCH Thermo-Controller
handles such temperature¡¯s sensing/analysis/dealing/data transmission
within the temperature-watch area by digital way, the reliability
and the expandability are better than analog temperature detector
so the management efficiency is improved. |
| €ý Alarming signal transmission not
only by individual contact point but also by digital data communication |
| The BESTOUCH Thermo-Controller
is able to transmit the alarming signal through the point of contact,
and also possible to transmit the temperature data of temperature-watch
area and/or alarming data by data communication so it is possible
to variously choose the option upon the usage. |
| €ý Synthetic (general) watch (monitoring)
is possible at the Main Center |
| The BESTOUCH Thermo-Controller
is able to do such synthetic-watch for sensor status (disconnection),
communication status, alarm status upon alarm & pre-alarm temperature,
and current temperature of each sensor in the local area through monitoring
at the Main Center. |
| €ý Possible to change the alarm status
conditions to detect according to the spot |
| According to the characteristics
and structure of the area to watch, the BESTOUCH Thermo-Controller
is able to variously setup the watch-temperature for alarm. (50¡É ?
150 ¡É) |
| €ýOUTPUT function upon each kind of
situation |
| The BESTOUCH Thermo-Controller
is able to obtain such suitable output for the user requirements through
the communication data signal 1EA (RS-485) and no-power-required contact
point 2EA (Alarm & Sensor Fault). |
| €ý Pre-Detection function before fire
breaks out |
| The BESTOUCH Thermo-Controller
makes fire-alarm and pre-alarm (before fire breaks out) according
to the value of dual level temperature HIGH/LOW already setup after
measuring the temperature of the spot at the detection part so it
is possible to get to know if there is any fire breaks out at the
very beginning since such check-up (confirmation) is able to be made
at the disaster prevention center. |
| €ý Acquisition of UL and CE certifications |
UL File No : S7948
CE Registered No. : KZ-02-E-00081
|
|
 |
| |
Standard |
| SIZE (Dimension) |
120(W) ¡¿ 100(D) ¡¿ 30(H) [mm] |
| Input Power |
DC 24V (DC 12V ¡ 24V) |
| Current |
90mA |
| Communication Method |
RS-485 ( 2 Wire ) |
| Address Grant |
Individual Address is granted (when using communication) |
| Temperature Sensor |
PT 100 Sensor |
| Output Contact Point |
2EA(Alarm, Sensor disconnection), possible
to choose A or B contact point (contact point A is fundamental) |
| Measuring Temperature |
-10 ¡É ¡ 200 ¡É |
|
|
 |
 |
|
