|
Our Products
Automatic Fire Extinguisher
|
 |
 |
Automatic Fire Extinguisher
This equipment is possible to be connected with various kinds
of fire detectors (heat-detector, smoke-detector, flame-detector,
and so on), and especially, it is possible to do such remote-control/detection
of output information, alarming status (Pre-Alarm, High Alarm),
and real-time temperature changes within the fire-protection area
by data communication when this equipment is connected with our
company¡¯s digital temperature controller. Since such communication
module is embedded (internally equipped) in the BESTOUCH-PKG system
itself, it is possible to monitor the status of digital temperature
controller and all kinds of in/output status of automatic fire extinguisher
in real time at the central disaster prevention center without such
separate translator or repeater for communication, therefore, it
is possible to minimize such enormous damage of human life and properties
when there fire comes up. |
 |
 |
| ¤ıAutomatic extinguishing function
in case of fire |
| In case of fire, it is
possible to extinguish fire at the very beginning within such short
time since the extinguisher gets automatically operated at the same
time that the fire is detected by the detector. |
| ¤ıSystem normal operation is possible
even in case of electricity failure |
| Since emergency power
is embedded within the system, it is automatically converted to the
emergency power in case of electricity failure or power cut-off by
disorder of the main power therefore such normal operation of system
is possible and it is designed to normally deal with those emergency
cases. |
| ¤ı Various check functions using control
circuit |
Since this device has
such inspection function by itself, handy inspection is possible,
and especially, such malfunction that could be made by mistake has
been minimized because this system is separated into ¡®front display
part¡¯ and ¡®internal main control part¡¯, and also, it is designed to
easily deal/respond with fire cases based on such prompt decision
of the situation.
On the display part, it is possible to grasp the details and information
through LCD with LED that makes it possible to easily and clearly
discriminate/decide the situation at once in case of emergency, and
it is also possible to easily control/operate all kinds of controlling
functions.
|
| ¤ıIntegrated watch is possible based
on detection of smoke and heat |
| BESTOUCH-PKG system is
able to detect fire in various ways based on each sensor for heat/smoke
detection. |
| ¤ı Digital Control Process |
| As every function that
handles/transmits/analyzes the information detected based on heat/smoke/temperature
in case of fire is digitalized, the reliability and expandability
are better than those of existing analog process, and also, such management
efficiency of total facilities has been maximized as providing various
and precise data. |
| ¤ı Digital Data Communication (RS-485) |
| Since such function of
communication is embedded into BESTOUCH-PKG system itself, it is possible
to monitor the fire extinguisher¡¯s detailed status in real time, and
especially, way better stable communication status is kept up since
the digital data communication method (RS-485) is used and accordingly
those all kinds of information values¡¯ error rate has been minimized. |
| ¤ı Installation within protection
equipment |
| As BESTOUCH-PKG is able
to be installed within such equipment that is subject of protection,
the separate/extra container storeroom is not necessary. |
|
 |
- Patent registration
No. 0385758 (2003)
- Formalized/Authorized by Korea Fire Equipment Inspection Corporation
- CE certification (LVD, EMC)
|
|
 |
| |
CO2 PACKAGE |
| Name of Model |
CM7S |
CM7D |
CP45S |
CP45D |
| Dimension |
H |
960 |
960 |
1930 |
1930 |
| W |
400 |
480 |
550 |
700 |
| D |
325 |
325 |
430 |
480 |
| Fire extinguishing chemicals |
CO2 GAS |
| Storage Capacity |
7§¸ ¡¿1 |
7§¸ ¡¿2 |
45§¸ ¡¿1 |
45§¸ ¡¿2 |
| Weight |
About 70§¸ |
About 90 §¸ |
About 190 §¸ |
About 320 §¸ |
| Coating/Painting |
Red Powder Coating |
Beige Powder Coating |
| Surrounding¡¯s Temperature for use |
¡¾ 0¡É - £« 40 ¡É |
| Power |
Power for use |
AC 100V / 220V |
| Power for emergency |
DC 24V,1300mAh Ni-Cd Battery |
| Circuit Voltage |
DC 24V |
| External Output Voltage |
DC 24V |
| Detector Signal Input |
In case of AND Circuit |
Operated when 2 circuits (L1, L2)
of detector detect |
| In case of OR Circuit |
Operated when 1 circuit (one of
L1 and L2) of detector detects |
Control
Function
|
System status |
Able to check up through LCD screen |
| Manual starting button |
Red PUSH button (acryl plastic
button that is easy tobe broken) |
| Power indication lamp |
Green LED lamp |
| PC communication lamp |
Green LED lamp |
| TC communication lamp |
Green LED lamp |
| Power in reserve indication lamp |
Red LED lamp (get turned on when
the main power is OFF) |
| Power in reserve disconnection lamp |
Yellow LED lamp (get turned on
when the power in reserve is disconnected)
|
| Notice lamp |
Yellow LED lamp (get turned on
when switch input and every kind of disconnection) |
| Fire indication lamp |
Red LED lamp (get turned on when
the fire detector is operated) |
| Starting indication lamp |
Red LED lamp (get turned on when
¡®start¡¯ is operated) |
| Radiation indicating lamp |
Red LED lamp (get turned on when
the fire extinguishing chemicals are radiated) |
| Alarming SIREN |
SIREN blows (when the fire is occurred
and/or some abnormal signal is input) |
|
|
